View Full Version : 18F2550 Compile problem
NL2TTL
- 26th September 2006, 10:31
I trie to compile the example program, USBCDC but i get the following error:
Warning[230]c:\pbp\18f2550.inc 20: __CONFIG has been deprected for PIC18 devices. Use directive CONFIG.
Can anybody tell me what to do?
HenrikOlsson
- 26th September 2006, 10:43
Hi,
First of all you need to use MPASM for the 18X series, so switch to that if you haven't allready. Then have a look here:
http://www.picbasic.co.uk/forum/showthread.php?t=543
Specificly the post from Steve (mister_e) on 29th october -05.
The latest version of PBP (2.47) hides that warning but I think it's best to get used to the new way Microchip wants it.
Hope it helps!
/Henrik Olsson.
sayzer
- 26th September 2006, 10:43
This is not an error, just a warning.
keithdoxey
- 26th September 2006, 10:44
I trie to compile the example program, USBCDC but i get the following error:
Warning[230]c:\pbp\18f2550.inc 20: __CONFIG has been deprected for PIC18 devices. Use directive CONFIG.
Can anybody tell me what to do?
Its not an ERROR otherwise it would say "Error".
Its a WARNING that the syntax you are using to declare the configuration has been superceeded by a "new improved" version.
At the moment both methods work but in a later version of the assembler your declaration may no longer be supported.
There are several threads covering the topic.
http://www.picbasic.co.uk/forum/showthread.php?t=543
http://www.picbasic.co.uk/forum/showthread.php?t=4381
http://www.picbasic.co.uk/forum/showthread.php?t=3943
Hope that helps
NL2TTL
- 26th September 2006, 19:54
After a few modification on the include file the pic is up and running again.
Thank you all
Powered by vBulletin® Version 4.1.7 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.