View Full Version : distance sensor
ngeronikolos
- 26th January 2006, 09:03
Hello boys and girls,
I am looking for a distance sensor making a parking system for my car.
Does anyboby suggest me any sensor using it with 16f628.I want to keep the cost down.
Thanks
Nikos
jessey
- 27th January 2006, 08:19
Hi Nikos,
You should get the book called "Experimenting with the PICBASIC PRO compiler" by Les Johnson. He has an example program called SON_PROX.bas complete with schematics and explanation. It uses 2 ultrasonic transducers modulated at 40 kHz. The circuit uses an op-amp to amplify and convert the received sound into a TTL voltage and a transistor to adjust the sensitivity back to the pic. That's a pretty low parts count. He's using a PIC16f84 micro so a 628 will work. He reports that his set-up will give a sensitivity of approximately two feet. Ultrasonic transducers are what most of the commercial units use for back-up sensors if I'm not mistaken. Let me know how you make out.
Good Luck
jessey
ngeronikolos
- 27th January 2006, 10:37
Thanks
I have just find the book you suggest me.
I will look on it and I will let you know.
Regards
Nikos
Powered by vBulletin® Version 4.1.7 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.