View Full Version : Hyperterminal
rocky79
- 29th October 2005, 07:21
DOes anyone knows how to use the hyperterminal to send data back from a microcontroller to a pc program like Excel. Or if you can send me your favorite link that would be great
Thanks you
mglazer
- 30th October 2005, 03:52
If it was me I would make a little terminal program in something like Visual Basic and use the office com objects to write to a excel spreadsheet.
www.planetsourcecode.com has lots of terminal program examples.
rocky79
- 31st October 2005, 16:47
Is it easier to write a Vb program? what's the other alternative...Thanks for the reply
If it was me I would make a little terminal program in something like Visual Basic and use the office com objects to write to a excel spreadsheet.
www.planetsourcecode.com has lots of terminal program examples.
Luciano
- 31st October 2005, 18:44
Hi,
Use the HyperTerminal feature "Capture text". (Menu transfer).
With the PIC send Comma Separated Values (CSV) to HyperTerminal.
* * *
Step 1:
Start "Capture text" in HyperTerminal. (File xyz.cvs)
Step 2:
With the PIC send the comma separated values to HyperTerminal.
Step 3:
Close the file in HyperTerminal. "Capture text/Stop". (Menu Transfer).
Step 4:
Open the comma separated value (CSV) file with Excel.
* * *
The Comma Separated Value (CSV) File Format:
http://www.creativyst.com/Doc/Articles/CSV/CSV01.htm
Best regards,
Luciano
rocky79
- 1st November 2005, 00:18
Thanks Luciano
Powered by vBulletin® Version 4.1.7 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.