MEL PIC BASIC Manual

[lester]

http://www.melabs.com/downloads/pbpm502a.PDF

[igeorge]

I can not get to the manual as the link is dead. Do you have an other link ?
Ion

[badrad]

try this link:
http://www.melabs.com/downloads/pbpm304.pdf

[Melanie]

I think the pdf manuals have been removed by MeLabs, however the html version is on-line here for the PBP version...

http://www.microengineeringlabs.com/resources/pbpmanual/

and here for the plain vanilla...

http://www.microengineeringlabs.com/resources/pbcmanual/

Melanie

[igeorge]

Thank you Melanie. What is the actual verion of the Pic Basic Pro ?
What is the actual version of PBP, because on the posted link it was mention 5 or something similar, but the version which i bought a week ago it is 2.45 ?!?!
Ion

[mister_e]

Hi igeorge,
current version is indeed 2.45. As i read in your pots, you buy it from Reynolds Electronic (rentron.com). Be sure that Bruce will not offers less than the lastest version.

regards

[igeorge]

I cheked my version by doing an update which returned the message:
You have the latest version, no update available.
Merci beaucoup

[mister_e]

Hi igeorge,
you do your check in MicroCode Studio. It doesn't check for the PicBasic Pro version. Only for microCode studio Version.

bienvenu

[Melanie]

> What is the actual version of PBP, because on the posted link it was mention 5 or something similar

That's the manual Revision I believe which on my last .pdf dowload was 5.02.

This page gives you the current Version History...

http://www.melabs.com/support/upgrade.htm

Do check with the MeLabs website regularly for Updates, Upgrades, downloads, etc etc.

[igeorge]

Thank you Melanie,
I got the link and the manual as you sugested.
Do you know where i can get the link for the pdf version ?
Thank you
Ion

[igeorge]

Melanie,
I know it is not the place for this post here, but as you will recieve notification on your mail i will ask for help.
On the schematic forum i put a post as:
"Newbie needs help"
I can not make the chip to run in its own, nor i know how to make a chip to use it in a stand alone PCB.
Can you please , have a look and switch on the light in this problem?
Thank you
Ion

P.S. I am just 5 days old with Pics and Flash-Lab.
I just give up with stamps and try to get more from PICs

[Melanie]

pdf's seem to have been removed as I mentioned earlier.

Questions regarding why should best be directed to MeLabs.

[Acetronics2]

Hi,

Looking for the 2.60 pdf Manual ??? :)

http://melabs.com/downloads/PBP_Manual_0609_260.pdf

Alain