DT_INTS-18xv for 18F K42, K83, and Q43 families and PBP library optimizations

[tumbleweed]

I posted a version of DT-INTS for the K42/K83/Q43 families over on the melabs forum:
DT_INTS-18xv for 18F K42, K83, and Q43 families (https://support.melabs.com/forum/picbasic-pro-compiler-3-0-and-later/pbp3-picbasic-pro-3-0/8695-dt_ints-18xv-for-18f-k42-k83-and-q43-families)

along with updated libraries for PBP 316 to optimize the K42/Q43 MOVFFL usage:
library optimizations for 18F K and Q families (MOVFFL) (https://support.melabs.com/forum/picbasic-pro-compiler-3-0-and-later/pbp3-picbasic-pro-3-0/8683-library-optimizations-for-18f-k-and-q-families-movffl)

[Ioannis]

Many thanks for these new files.

Ioannis

[tumbleweed]

I forgot to mention - the updated library files for the Q43 also include a fix for the EEPROM read routine, where reading eeprom did not work unless a write was done first.

[retepsnikrep]

Thanks very much.

[tumbleweed]

There's a new version of DT_INTS-18xv that fixes a mistake with the K42/K83 INT0 definitions.
(Thanks to Henrik who found it).

V4.30, link available in the original post.