PDA

View Full Version : Oscilloscope display



Art
- 5th May 2016, 13:57
Hi Guys,
A little go at making a signal scope display :D

https://www.youtube.com/watch?v=AXcol60_UkE

I’m not altogether happy with it, but the poor 16f628A is probably doing a bit much besides drawing.
Cheers, Art.

Art
- 6th May 2016, 17:28
Ok, fixed the thing, and the line mode is working properly.

https://www.youtube.com/watch?v=qzCZIcDxJmA

I’ll put the code up when I see if I can make it useable in a generic way.
Cheers, Art.

Heckler
- 6th May 2016, 20:58
That's pretty cool Art,

Taking "minimalist" to a new high :D

Do you have a specific application you are aiming for?

Art
- 7th May 2016, 06:15
Hi Heckler, Thanks, yes it’s to modulate the supply of a desktop Tesla coil.
There will be a third relay to set at the taps of a 3 x SLA battery bank so it can change voltage as well,
so there should be a basic sine wave somewhere along the line.