PICKIT 2 verification failed at memory address 0x0000

[tarekmdimagh]

I have been using a "pic1 (http://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en010337)6f628A"

The problem I am getting:

Failed to verify at programming address 0x0000 (when I click the Verify button).

Failed to program at programming address 0x0000 (when I click the Write button).

Successful (when I click Read button).

Successful (when I click erase button).

when I put another chip with same model is working
http://store1.up-00.com/2016-01/145296872996771.png

[Charlie]

Maybe a silly question but are you SURE it's connected properly? Pins not offset by one, connector not backwards, no broken wires?

[commandeur83]

I had the same problem. Measure the correct value of the programming voltage.