longpole001
- 4th April 2015, 22:57
had a need to review the DC low power supply for SMD redesign , and caps / size, over a a large temp range are major consideration of the selection and type in the design
found this paper that gives a good review of Tant v multilayer ceramics , ESR and ISR considerations
worth a read
http://www.avx.com/docs/techinfo/mlc-tant.pdf
found this paper that gives a good review of Tant v multilayer ceramics , ESR and ISR considerations
worth a read
http://www.avx.com/docs/techinfo/mlc-tant.pdf