PIC18F1320 Config Help

[iw2fvo]

Good day to all of you in the forum,
I have to replace the pic16f628 with a PIC18F1320.
I want to retain the same PBP basic program. I am not able to make it working: probably there is a fault in the configuration of the program.
It will operate at 20 MHz with an external XTAL. No analog interface is required.
I am asking if someone could help me in setting up the configuration piece of program using PICbasic Pro.
Thanks in advance for any help.
Best regards,
Ambrogio
IW2FVO

[Demon]

Have you tried the Advanced Search feature using 18F1320 CONFIG?

http://www.picbasic.co.uk/forum/showthread.php?t=16711&p=114752#post114752

Robert

[iw2fvo]

Thanks ,
but it refers to a different PIC type.
I would like to define the configuration for using a PIC18F1320 , 20 Mhz Xtal and the possibility to manage very few discretes and an LCD.
I have the PBP program running on a PIC16F628 but not able to transfer it on PIC18F1320.
Any help ?
Thanks for the assistance.
Ambrogio

[Demon]

Hmmm, was sure I had the right PIC.

What about this?

http://www.picbasic.co.uk/forum/showthread.php?t=16229&p=112124#post112124

Robert

[iw2fvo]

Thanks a lot Robert: it is working well now !
Ambrogio