Brian
- 1st April 2005, 16:46
Does any one know if it is ok to us the I/O pin (RA5 18F2320) as a general purpose I/O when you use the internal Low Voltage Detect circuit and not the external one.
From the schematic it looks to be ok but thought I would ask if anyone does this already. I am guessing that you can as long as you don't use the external low voltage setup.
thanks
From the schematic it looks to be ok but thought I would ask if anyone does this already. I am guessing that you can as long as you don't use the external low voltage setup.
thanks