PDA

View Full Version : The best editor ?


vicce67
- 30th June 2011, 22:19
Dear Friends,

exists some better and more complete editor than the microcode studio for the picbaic of the type of the editor of the mikro basic ?

in advance thankful,

vicente
Normnet
- 1st July 2011, 04:38
You might try FineLine IDE (http://www.norm-online.net/FineLineIDE.php)
FL does bracketing to link the If's with the Endif's etc.

Norm
mackrackit
- 1st July 2011, 06:35
FineLine has my vote too.
aratti
- 1st July 2011, 21:26
Norm, you will get my vote too, but before you must tell me how do you select a device in your nice editor?

Do you have a "USER MANUAL" ?

Cheers

Al.
Normnet
- 1st July 2011, 22:27
Norm, you will get my vote too, but before you must tell me how do you select a device in your nice editor?

Do you have a "USER MANUAL" ?

Cheers

Al.
Add:
'XFL_PIC18F2550X' (replace the X's with a a less than and a greater than)
with correct PIC to code or
select from the "select a device" drop down box which appears when PicBasicPro is selected in options.

No users manual at this time.

Norm
mackrackit
- 1st July 2011, 23:14
'Selects the Chip
'<FL_PIC18F2550>'
'Selects PBPL
'<FL_PBPL>'
Charles Linquis
- 2nd July 2011, 00:28
I go back and forth between MCS and FineLine. FineLine is fantastic when you have huge IF THEN ELSE structures..
LGabrielson
- 2nd July 2011, 01:42
This is the first I've heard of FineLine. I just gave it a try, and see that it's having trouble with these:

@ __CONFIG _CONFIG1H, _OSC_ECIO6_1H & _FCMEN_OFF_1H & _IESO_OFF_1H
@ __CONFIG _CONFIG2L, _PWRT_OFF_2L & _BOREN_ON_2L & _BORV_1_2L
@ __CONFIG _CONFIG2H, _WDT_ON_2H & _WDTPS_512_2H
@ __CONFIG _CONFIG3H, _CCP2MX_PORTC_3H & _PBADEN_OFF_3H & _LPT1OSC_OFF_3H & _MCLRE_ON_3H
@ __CONFIG _CONFIG4L, _STVREN_ON_4L & _LVP_OFF_4L & _XINST_OFF_4L

How do you deal with these? Must the .INC fine be modified instead?

Is there documentation available for FineLine?
LGabrielson
- 2nd July 2011, 01:48
Oops. It works fine. Just a syntax error on my part.
LGabrielson
- 5th July 2011, 21:38
If you've got multiple files open, how do you CLOSE individual files?????? :cool:
mackrackit
- 5th July 2011, 22:28
The round red button with an X in it on the right hand side of the tab bar works for me.
jellis00
- 10th July 2011, 21:44
Just dowloaded FineLine and tried it. Some trial and error in setting up Options, for which a User Manual would have helped. But I have to say, it is a Great Editor! Good job, Norm! Like others have implied, I hope you have a User Manual planned.