jerrico
- 16th April 2011, 06:03
hi,
this topic is been discussed earlier but it didnt solve my problem so i am posting it again
i am using PIC18F452 and tinybld to prgm it and i am getting this error in tinybld window
Connected to \\.\COM1 at 9600
HEX: 1 hours old, INHX32,18Fcode+cfg, total=62 bytes.
Searching for PIC ...
pic sending unknown data: "K" <> F8h=ø
Check baudrate & Start Write while PIC is not sending serial data (e.g. in reset)
ERROR!
I pressed the reset button and released it immediately after hitting the "WRITE FLASH" button .but still its not working
plz help
this topic is been discussed earlier but it didnt solve my problem so i am posting it again
i am using PIC18F452 and tinybld to prgm it and i am getting this error in tinybld window
Connected to \\.\COM1 at 9600
HEX: 1 hours old, INHX32,18Fcode+cfg, total=62 bytes.
Searching for PIC ...
pic sending unknown data: "K" <> F8h=ø
Check baudrate & Start Write while PIC is not sending serial data (e.g. in reset)
ERROR!
I pressed the reset button and released it immediately after hitting the "WRITE FLASH" button .but still its not working
plz help