Twin coil relays

[netstranger.nz]

Hi Everyone

Recently I came across twin coil PCB relay. It was used as an H-bridge to drive the vehicle seat back and forth. Attached is a pdf from Tyco. If you have come across them where can you buy some?

[Dave]

Why not just use 2 individual relays as they are easier to locate, unless board space is at a premimum.....

Dave Purola,
N8NTA

[Archangel]

Hi Everyone

Recently I came across twin coil PCB relay. It was used as an H-bridge to drive the vehicle seat back and forth. Attached is a pdf from Tyco. If you have come across them where can you buy some?
Looks like a discontinued product . . . maybe?
Here is a link to tyco, you might have luck if you contact them.
http://www.tycoelectronics.com/catalog/products/en?q=twin+coil+relay

[netstranger.nz]

Thanks a lot people
I'll go with two relays

[Dave]

netstranger.nz, Here is a relay that I used quite a few years ago when I designed a FIRST look alike controller for our robotics team here in the US. I beleive they still make them. Thay were used in modules like Memory Seat's, and Seat positioner's.

Dave Purola,
N8NTA