Where can I find the PIC18 .INC file for device definitions?

[LinkMTech]

Okay, I finally upgraded to PBP PRO 2.60A and moving on to the PIC18's and starting a new project and learning curve.
The weapons of choice are the PIC18LF13K22 (downloaded the "melabs Programmer 4.32 Beta" file) and PIC18F2331.
Right out of the gate, I'm stuck at setting the configuration fuses for the PIC18LF13K22 since I can't locate the device definition INC file for the part in the INC folder to see my choices.

Here are default settings that I commented out to configure from the top of the program:


NOLIST
ifdef PM_USED
LIST
"Error: PM does not support this device. Use MPASM."
NOLIST
else
LIST
LIST p = 18LF13K22, r = dec, w = -311, w = -230, f = inhx32
INCLUDE "P18LF13K22.INC" ; MPASM Header
; __CONFIG _CONFIG1H, _FOSC_HS_1H & _PLLEN_OFF_1H & _PCLKEN_ON_1H & _FCMEN_OFF_1H & _IESO_OFF_1H
; __CONFIG _CONFIG2H, _WDTEN_ON_2H & _WDTPS_512_2H
; __CONFIG _CONFIG4L, _STVREN_ON_4L & _LVP_OFF_4L & _BBSIZ_OFF_4L & _XINST_OFF_4L
NOLIST
endif
LIST
EEPROM_START EQU 0F00000h
BLOCK_SIZE EQU 8


I tried to change the FOSC to INTOSC with the various guesses:


@ __CONFIG _CONFIG1H, _FOSC_INTRC_1H
@ __CONFIG _CONFIG1H, _INTRC_OSC_NOCLKOUT

Also tried:
CONFIG1H=%00001000

These only generated "Symbol not previously defined" errors. :(

I read Melanie's excellent post on "Presetting Configs", searched the forum and melabs for more clues but nothing yet.

I found this info interesting but also useless to my problem since inputting values didn't work:


PIC18F1XK22/LF1XK22
DS41357B-page 28 Advance Information © 2009 Microchip Technology Inc.
TABLE 6-3: PIC18F1XK22/LF1XK22 BIT DESCRIPTIONS
Bit Name Configuration
Words Description
FOSC<3:0> CONFIG1H Oscillator Selection bits
1111 = External RC oscillator, CLKOUT function on OSC2
1110 = External RC oscillator, CLKOUT function on OSC2
1101 = EC oscillator (low)
1100 = EC oscillator, CLKOUT function on OSC2 (low)
1011 = EC oscillator (medium)
1010 = EC oscillator, CLKOUT function on OSC2 (medium)
1001 = Internal RC oscillator, CLKOUT function on OSC2
1000 = Internal RC oscillator
0111 = External RC oscillator
0110 = External RC oscillator, CLKOUT function on OSC2
0101 = EC oscillator (high)
0100 = EC oscillator, CLKOUT function on OSC2 (high)
0011 = External RC oscillator, CLKOUT function on OSC2
0010 = HS oscillator
0001 = XT oscillator
0000 = LP oscillator


I would really appreciate some direction to make some progress with all this new stuff.
Thanks alot for all the past help.

[mackrackit]

You will not find 18LF, but 18F will do.

Goto Program files, Microchip, MPASM suite and you will find the INCs. The info needed is near the end of the file.

[ScaleRobotics]

I tried to change the FOSC to INTOSC with the various guesses:


@ __CONFIG _CONFIG1H, _FOSC_INTRC_1H
@ __CONFIG _CONFIG1H, _INTRC_OSC_NOCLKOUT

Also tried:
CONFIG1H=%00001000


You can find your .inc file here C:\Program Files\Microchip\MPASM Suite\P18LF13k22.INC

If it is not there, then download a newer mplab.

Here are the choices for the LF;


;----- CONFIG1H Options --------------------------------------------------
_FOSC_LP_1H EQU H'F0' ; LP oscillator
_FOSC_XT_1H EQU H'F1' ; XT oscillator
_FOSC_HS_1H EQU H'F2' ; HS oscillator
_FOSC_ERCCLKOUT_1H EQU H'F3' ; External RC oscillator, CLKOUT function on OSC2
_FOSC_ECCLKOUTH_1H EQU H'F4' ; EC, CLKOUT function on OSC2 (high)
_FOSC_ECH_1H EQU H'F5' ; EC (high)
_FOSC_ERC_1H EQU H'F7' ; External RC oscillator
_FOSC_IRC_1H EQU H'F8' ; Internal RC oscillator
_FOSC_IRCCLKOUT_1H EQU H'F9' ; Internal RC oscillator, CLKOUT function on OSC2
_FOSC_ECCLKOUTM_1H EQU H'FA' ; EC, CLKOUT function on OSC2 (medium)
_FOSC_ECM_1H EQU H'FB' ; EC (medium)
_FOSC_ECCLKOUTL_1H EQU H'FC' ; EC, CLKOUT function on OSC2 (low)
_FOSC_ECL_1H EQU H'FD' ; EC (low)
_PLLEN_OFF_1H EQU H'EF' ; PLL is under software control
_PLLEN_ON_1H EQU H'FF' ; Oscillator multiplied by 4
_PCLKEN_OFF_1H EQU H'DF' ; Primary clock is under software control
_PCLKEN_ON_1H EQU H'FF' ; Primary clock enabled
_FCMEN_OFF_1H EQU H'BF' ; Fail-Safe Clock Monitor disabled
_FCMEN_ON_1H EQU H'FF' ; Fail-Safe Clock Monitor enabled
_IESO_OFF_1H EQU H'7F' ; Oscillator Switchover mode disabled
_IESO_ON_1H EQU H'FF' ; Oscillator Switchover mode enabled
;----- CONFIG2L Options --------------------------------------------------
_PWRTEN_ON_2L EQU H'FE' ; PWRT enabled
_PWRTEN_OFF_2L EQU H'FF' ; PWRT disabled
_BOREN_OFF_2L EQU H'F9' ; Brown-out Reset disabled in hardware and software
_BOREN_ON_2L EQU H'FB' ; Brown-out Reset enabled and controlled by software (SBOREN is enabled)
_BOREN_NOSLP_2L EQU H'FD' ; Brown-out Reset enabled in hardware only and disabled in Sleep mode (SBOREN is disabled)
_BOREN_SBORDIS_2L EQU H'FF' ; Brown-out Reset enabled in hardware only (SBOREN is disabled)
_BORV_30_2L EQU H'E7' ; VBOR set to 3.0 V nominal
_BORV_27_2L EQU H'EF' ; VBOR set to 2.7 V nominal
_BORV_22_2L EQU H'F7' ; VBOR set to 2.2 V nominal
_BORV_19_2L EQU H'FF' ; VBOR set to 1.9 V nominal
;----- CONFIG2H Options --------------------------------------------------
_WDTEN_OFF_2H EQU H'FE' ; WDT is controlled by SWDTEN bit of the WDTCON register
_WDTEN_ON_2H EQU H'FF' ; WDT is always enabled. SWDTEN bit has no effect.
_WDTPS_1_2H EQU H'E1' ; 1:1
_WDTPS_2_2H EQU H'E3' ; 1:2
_WDTPS_4_2H EQU H'E5' ; 1:4
_WDTPS_8_2H EQU H'E7' ; 1:8
_WDTPS_16_2H EQU H'E9' ; 1:16
_WDTPS_32_2H EQU H'EB' ; 1:32
_WDTPS_64_2H EQU H'ED' ; 1:64
_WDTPS_128_2H EQU H'EF' ; 1:128
_WDTPS_256_2H EQU H'F1' ; 1:256
_WDTPS_512_2H EQU H'F3' ; 1:512
_WDTPS_1024_2H EQU H'F5' ; 1:1024
_WDTPS_2048_2H EQU H'F7' ; 1:2048
_WDTPS_4096_2H EQU H'F9' ; 1:4096
_WDTPS_8192_2H EQU H'FB' ; 1:8192
_WDTPS_16384_2H EQU H'FD' ; 1:16384
_WDTPS_32768_2H EQU H'FF' ; 1:32768
;----- CONFIG3H Options --------------------------------------------------
_MCLRE_OFF_3H EQU H'7F' ; RA3 input pin enabled; MCLR disabled
_MCLRE_ON_3H EQU H'FF' ; MCLR pin enabled, RA3 input pin disabled
_HFOFST_OFF_3H EQU H'F7' ; The system clock is held off until the HFINTOSC is stable.
_HFOFST_ON_3H EQU H'FF' ; HFINTOSC starts clocking the CPU without waiting for the oscillator to stablize.
;----- CONFIG4L Options --------------------------------------------------
_STVREN_OFF_4L EQU H'FE' ; Stack full/underflow will not cause Reset
_STVREN_ON_4L EQU H'FF' ; Stack full/underflow will cause Reset
_LVP_OFF_4L EQU H'FB' ; Single-Supply ICSP disabled
_LVP_ON_4L EQU H'FF' ; Single-Supply ICSP enabled
_BBSIZ_OFF_4L EQU H'F7' ; 512W boot block size
_BBSIZ_ON_4L EQU H'FF' ; 1kW boot block size
_XINST_OFF_4L EQU H'BF' ; Instruction set extension and Indexed Addressing mode disabled (Legacy mode)
_XINST_ON_4L EQU H'FF' ; Instruction set extension and Indexed Addressing mode enabled

[mackrackit]

Interesting..
Why did they do a separate INC for some of the LFs ? They seem to share the same data sheet..

[LinkMTech]

Thanks alot guys!
I almost took up drinking! some more :rolleyes: