Analog 627

[ChrisMicro]

Can I use port a 0-1 as analog inputs and the rest as digital output on the PIC16F62x? and how do I do it?

[cncmachineguy]

Had to reply just cuz I like your avaitar! But Also, You realize you don't have Analog Inputs so to speak, you have analog comparators. At least thats how I read the datasheet.

As far as your original queston goes, I think yes, just set CMCON for the AN inputs you want, and then TRISA for outputs where you want

[Acetronics2]

Hi, Chris

you even can use a digital input as an analog one ....

with the RCTime function ... ;)

Alain

[ChrisMicro]

Had to reply just cuz I like your avaitar! But Also, You realize you don't have Analog Inputs so to speak, you have analog comparators. At least thats how I read the datasheet.

As far as your original queston goes, I think yes, just set CMCON for the AN inputs you want, and then TRISA for outputs where you want

And I like yours, cncmachineguy no it is both I always use porta for AD conversion but I never tried it with only 2 ports as AD and the rest output see the lower down in the data sheet.