PDA

View Full Version : In-circuit device programmer for 16F1827 parts


J. Mark Wolf
- 28th October 2010, 01:37
Was dismayed to find that my PicKit2 doesn't support the 16F1827. My PicKit3 may, but only through MPLAB (nuisance), and Mecanique apparently doesn't offer a bootloader.

Now I'm thinking I may just build up a short patch cable from my MELabs U2 device programmer, crossing the wires appropriately to adapt the 10-pin header on the programmer, to the 6-pin PGC/PGD header for the device.

Can anyone advise of any downside to doing this for easy in-circuit device programming?
ScaleRobotics
- 28th October 2010, 02:30
Your Pickit2 just needs to be updated, and or a new device file. Here is the link: http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en023805

Here's my version:
4886
J. Mark Wolf
- 28th October 2010, 12:49
Your Pickit2 just needs to be updated, and or a new device file. Here is the link: http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en023805

Here's my version:
4886

That's great news. Thanks Scalerobotics!

I had the latest version of the app, but my device file was old.