Xbee, Again.

[uaf5000]

Hey guys.
I am sending a alpha numeric character from my micro to xbee and from one xbee module to other. The 2nd xbee is connected to computer where its displaying the sent character on hyper terminal. The problem is any number which i sent is being displayed as a "." (dot) on hyper terminal. What can be the problem?

[aratti]

Very likely hyper terminal has not been set properly. You can use X-CTU instead it should work.
You should have it, but in case not, you can download it @ Xbee site or you can download a nice terminal from this site:
www.laurtec.it/progetti-elettronici/software/103-rs232-terminal

Cheers

Al.