ICD connector for X1

[MOUNTAIN747]

On my X1 lab board there is a place to mount an ICD connector. At sometime in the past I remember coming across a statement somewhere that gave the Mouser part number for this connector. I have tried to locate this information for the last two days with no success. Does anyone know where this information is located?
Thanks!

[Bruce]

Like this one? http://store.melabs.com/prod/adapters/ICD210A.html

[Demon]

Yeah, I'm looking for that part too. But that thingy has more parts than I need, I want just the connectors, one for Lab X1 and one for circuit (and others).

http://www.digikey.com/scripts/US/DKSUS.dll?Detail&name=A31417-ND

I found the plugs here:
http://dkc3.digikey.com/PDF/US2010/P0315.pdf

Just not sure what are the differences between small solid, long body, flat oval, round, round long, long, etc.

[MOUNTAIN747]

Robert,
That looks like it. Mouser had a cad drawing (C-5520470-3-b-2d DXF, sorry I couldn't figure out how to attatch the DXF) of the jack and I made a compairison to the jack on my PICDEM2 board. I miked the PICDEM and the readings were exactly to the cad document. That should do the trick! Mouser Part# 571-5520470-3.

Thanks

[Demon]

You can't attach DXF.

Valid file extensions: bmp doc gif jpe jpeg jpg pdf png psd txt zip

But you can get around that by stuffing it in a ZIP file.

Of course it doesn't mean people will be able to view it either, you're much better sticking to a common format. Maybe take a screen print and then save as JPEG in MS Paint.