canbus

[nono2002]

hello I want to use a network can and j' have a problem with microcodes when I want to test or to write in a register it puts an error to me
example: yew rxb0con.7 = 1 then and also if I want to configure brgcon3 = % 00000010
thank you for m' to help or if you have an example communication to use with microcodes studio

[Archangel]

For a register to accept a value it must exist, same as a variable. Each chip is different.

[rsocor01]

Nono2002, welcome to the forum. Post your code, so people can help you better.