16F914 and MPASM

[jderson]

The following program compiles fine in both PBP and MPASM, but the version compiled with MPASM refuses to run. I'm using V5.14 of MPASM. Programs compiled on other PICS run fine.

OPTION_REG = %11000000
INTCON = 0
PIE1 = 0
PIE2 = 0
ANSEL = 0
TRISA = %00000000
TRISB = %00100001
TRISC = %00000000
TRISD = %00000000
TRISE = %1000
OSCCON = %00000001
CMCON0 = 7
ADCON0 = 0
WDTCON = 0

CLEAR

LCDPS = %00110000
LCDSE0 = %11111110
LCDSE1 = %11111111
LCDSE2 = %11111111

LCDDATA0 = $00
LCDDATA1 = $00
LCDDATA2 = $00

PIR2 = 0



SMCOUNT var byte
SMCOUNT10 var byte
SMCOUNT100 var byte

clear

LCDCON = %11001000

PORTA.7 = 0

Main:


PORTA.7 = 1
pause 10
PORTA.7 = 0
pause 10
goto Main

Anyone have any ideas why this is?

Thank you for your help.

[mister_e]

PORTA.7 share a couple of things

OSC1
CLKI
T1OSI

My first bet would be that you haven't set the OSC to internal... and if you did


OSCCON=0
'
'
'
'
'
'

OSCCON = %00000001

this make the whole thing running @ 32KHz :eek:

[jderson]

Yes, it's supposed to be running at 32khz internal. I am programming the '914 via ICSP, and other chips via the ME Labs USB programmer. Do you think this could make a difference?

[jderson]

O.K., after half a day of fighting this problem, I found the solution. When the MPASM check box is checked, you have the option of checking three additional boxes. I had the box marked "INHX8M" checked. When I checked the "INHX8S" box instead, the programs run O.K.

Where is this documented?

[mister_e]

In the MPASM assembler help file, somewhere under Hex file format.

Hex File Formats (.hex, .hxl, .hxh)
The MPASM assembler and MPLINK linker are capable of producing ASCII text hex files in different formats.

Format Name Format Type File Extension Use
Intel Hex Format INHX8M .hex 8-bit core device programmers
Intel Split Hex Format INHX8S .hxl, .hxh odd/even programmers
Intel Hex 32 Format INHX32 .hex 16-bit core device programmers


It's a bit ODD that INHX8S fixed it...

[jderson]

Alas, I was wrong! Iam still unable to program 16F914 using MPASM and ICSD. I can program using PBP, however. I am able to program 12F635 using either PBP or MPASM and the standard 40 pin ZIF socket from MELABS. I have asked MELABS for help with this.

Thank you for your help Mister e

[Bruce]

What are your config fuse settings?

If you're using the internal osc set for 31kHz, then you'll want to make sure you have config setting for internal osc set.

[jderson]

Thank you, Bruce. I just tried it again with the following line:

__config_DEBUG_OFF_FCMEN_OFF_IESO_OFF_BOD_OFF_CPD_ OFF_MCLRE_OFF_PWRTE_ON_WDT_OFF_INTRC_OSC_NOCLKOUT

It made no difference. Compiles in MPASM with no errors, but will not run:

__config_DEBUG_OFF_FCMEN_OFF_IESO_OFF_BOD_OFF_CPD_ OFF_MCLRE_OFF_PWRTE_ON_WDT_OFF_INTRC_OSC_NOCLKOUT
OPTION_REG = %11000000
INTCON = 0
PIE1 = 0
PIE2 = 0
ANSEL = 0
TRISA = %00000000
TRISB = %00100001
TRISC = %00000000
TRISD = %00000000
TRISE = %1000
OSCCON = %00000001
CMCON0 = 7
ADCON0 = 0
WDTCON = 0

SSPCON = 0
CCP1CON = 0
CCP2CON = 0

CLEAR

LCDPS = %00110000
LCDCON = 0
LCDSE0 = 0
LCDSE1 = 0
LCDSE2 = 0

PORTA.7 = 1
LED1 VAR PORTA.7

Main:

PORTA.7 = 1
pause 10
PORTA.7 = 0
pause 10
goto Main

Any other suggestions?

[mister_e]

It shouldn't compile the way you did it... seems odd syntaxe.

How about

@CFG1 = _DEBUG_OFF & _FCMEN_OFF & _IESO_OFF & _BOD_OFF & _CPD_OFF
@CFG2 = _MCLRE_OFF & _PWRTE_ON & _WDT_OFF & _INTRC_OSC_NOCLKOUT
@ __CONFIG CFG1 & CFG2

[Bruce]

If you really got this to compile as-is, you definitely have something VERY strange
going on.

That config line is really a mess. Try the attached and let me know if it works.

[jderson]

Problem finally solved! The config settings were the problem. Thank you, Bruce, your code worked. Thanks also to Charles Leo at MeLabs. You both solved the problem at the same time! Will I ever learn?