View Full Version : i wanna some 1 to help me in my Grad.proj
cool_guy4ever15
- 26th November 2008, 10:15
hello every one
am new in thi forum i registered coz i saww ppl helping each other
am haitham in my last year faculty of engineering comm department.
my graduation project is SMS REMOTE control in brief: we will control
devices by sms my ic is AT8952 i can't find any data sheets for this ic
am sure there is data sheet and instruction set i wish if any 1 can hlp me
to get this data sheet and the instruction set plz tell me.and i wanna know
what r the AT commands and how can i make it work on the mobile..
am sorry am still beginner in my proj. i think this will be my ckt. http://www.serasidis.gr/circuits/smscontrol/smscontroller.htm
sorry i asked more.i wish u don't get bored.
thanks alot and i'll be in touch...
Luciano
- 26th November 2008, 10:52
Hi,
Your chip is an Atmel microcontroller using the 8051 Architecture.
Where to get the datasheet:
8051 Architecture - Devices
http://www.atmel.com/dyn/products/devices.asp?family_id=604
If not listed in the above page, then try here:
http://www.atmel.com/dyn/products/devices.asp?Status=Mature&family_id=604&family_name=8051%20Architecture
(Mature - Devices / not for use in new designs)
8051 Microcontroller Instruction Set
http://www.atmel.com/dyn/resources/prod_documents/doc0509.pdf
* * *
This forum is about PicBasic. (Microchip PIC microcontrollers).
Best regards,
Luciano
cool_guy4ever15
- 26th November 2008, 13:35
thanks alot Luciano for ur help.
i really approtiate it.but i wanna ask u do u mean "This forum is about PicBasic". that i can't ask about or u don't have enough inf about atmel.
if so am sorry. and if u know a good forum that can help me plz tell
me...
thanks again for ur help
Acetronics2
- 26th November 2008, 13:53
Hi,
That means ...
1) this forum is NOT speaking Atmel Assembler ...
2) this Forum only deals with MICROCHIP processors
3) this forum even HARDLY understands µChip assembler.
so ... there is very little chance for you to get usable "8051" Help Here ...
Alain
cool_guy4ever15
- 27th November 2008, 00:29
can any 1 here tell me a forum for atmel programing
and i wanna know the diff. between atmil and PIC plz
mackrackit
- 27th November 2008, 01:50
http://www.google.com/search?q=atmel+discussion+forums&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a
GOOGLE to the rescue. :)
rmteo
- 27th November 2008, 01:50
can any 1 here tell me a forum for atmel programing
and i wanna know the diff. between atmil and PIC plz
http://www.avrfreaks.net/
One is good - the other is better. You figure out which one is which. :D
Luciano
- 27th November 2008, 09:45
can any 1 here tell me a forum for atmel programing
and i wanna know the diff. between atmil and PIC plz
Hi,
Your microcontroller is a 8051-compatible chip made by Atmel.
The original 8051 chip was developed by Intel in 1980.
http://en.wikipedia.org/wiki/Intel_8051
The Microchip PIC and the Atmel AVR are completely different chips.
http://en.wikipedia.org/wiki/Atmel_AVR
http://en.wikipedia.org/wiki/PIC_microcontroller
Best regards,
Luciano
cool_guy4ever15
- 27th November 2008, 19:10
i approtiate ur help thanks alot...
can i know the corresponding pic for my atmel and it's specifications
HYETİK
- 14th April 2009, 09:48
what is your atmel mcu's specification?
write down and wanna help you.
HYETİK
- 14th April 2009, 09:50
PIC16f877 have 40 pins and 8k code memory,
and PIC18f452 also has 40 pins and 32K code memory
these two PICs you can use for lots of projects.
Powered by vBulletin® Version 4.1.7 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.