Weather proof coating
Anyone have any ideas on this one.
On a small board I'm going to have two LEDs with a wire running to a control box. The little board with the LEDs on it will be exposed to the elements (rain mostly).
I don't want to put this in any kind of enclosure since I would need 160 of these little enclosures. I want to coat the board with something and just leave the tips of the LEDs out.
What might work without peeling off or leaking?
Thanks.
Bart
Last edited by bartman; - 3rd December 2004 at 03:44.
|
exterior silicon or urethane.
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
Hello!
Plastic Bottle Caps as enclosure (green if possible) and Silicon Mastic. (Not a water-based acrylic elastomeric mastic)!!!!!
If you use a bottle cap as enclosure there is no need for the small board carrying the two LEDs.
Merry Christmas!
Luciano
|
See attached file.
Luciano
|
Good idea just not wide enough. I need something about 2 inches wide for the LED spacing. Finished project must also be as light and unnoticable as possible.
Thanks.
Bart
Members who have read this thread : 1You do not have permission to view the list of names.
Posting Permissions
Bookmarks