Serout2

[Mostafa]

hi,

in page 141 of the PBP Manual , (you can download from here: http://melabs.com/downloads/pbpm304.pdf) ,and in SEROUT2 command, it says:
"Bit 15 selects whether the data pin is always driven (bit 15 = 0), or is
open in one of the states (bit 15 = 1). The open mode can be used to
chain several devices together on the same serial bus."

can anyone explain more about this paragraph. (open and driven?)

with best regards.

[mackrackit]

See if this helps

http://www.picbasic.co.uk/forum/show...en+serial+port

Let us know if this helps.

[Mostafa]

hello mackrackit,

thanks for your help. it helps me.

with best regards, Mostafa, Iran