Interrupts using a 16F877

[Niall]

Greetings,

I am using Letbasic 7.1 and have had success using interrupts on the 16F84. My main use is via TMR0 roll-over and the first time I used Interrupt.bas supplied by letbasic. However, this will not assemble when the device chosen is the 16F877, claiming duplicate or missing lables for all lables used in the entire program. Actually, none of the interrupt programs will assemble under the 16F877.

Looking forward to the solution,

Niall.

[Melanie]

Wrong forum for Let Basic.

This is for MELabs PICBasic and PICBasic Pro.

Try http://www.letbasic.com/

Melanie