What do i send

[ZeroFusion]

hey,
I need to programme my flash pic from my pc, its connected directly through serial. what commands cxan i use either in c or in visual basic?

thanks

[sayzer]

What do you mean by "I need to programme my flash pic from my pc" ?

You want to insert your HEX file into the PIC or you will do something else?


-------------------------

[mister_e]

You have to use a device-programmer in-between.

There's tons of model, depending your budget, it goes from 2$ to 1000$

A nice starter kit is probably the Microchip PICkit 2. 'round 50$ and comes with a little development board.

[ZeroFusion]

What do you mean by "I need to programme my flash pic from my pc" ?

You want to insert your HEX file into the PIC or you will do something else?


-------------------------

The plan is to insert the hex into the pic! lol can you tell i'm new at this! :-)

[mister_e]

http://www.microchip.com/stellent/id...PAGE&nodeId=81
http://www.microchip.com/stellent/id...cName=en023805
www.ic-prog.com
www.winpicprog.co.uk
http://www.lancos.com/prog.html
http://www.bkprecision.com/www/np_se...OM+Programmers
http://www.elnec.com/programmers.php
http://www.elnec.com/pikprogplus.php
http://www.electronicaestudio.com/en/basicos.htm
http://www.google.ca/search?hl=en&sa...rammer&spell=1