New PIC Utility. PICMultiCalc

[bcd]

Thanks guys,

I knew someone would have it !

Now to work out how to to 10mS int's on a 18f2550 running at 48MHz !!

Bill

[Glenn]

Stuopid me, athat didnt read all posts before replying.. :/

[Acetronics]

Thanks Alain!

No,No ... Steve

Thanks are for you !!!

Best regards

Alain

[Normnet]

PICMultiCalc gets runtime errors in windows 7.
Is their a newer version than 1.3.1?
This is a much used utility and an update would be appreciated.

Norm

[HenrikOlsson]

Hi Norm,
I run it on Win7-64bit and don't get any runtime (or other) errors. I don't know what version I'm running but I can check tonight. If you haven't already tried it, try running it as administrator and see if that help. I've had several apps where doing that is neccessary for it to work.

[Normnet]

Hi Norm,
...try running it as administrator and see if that help. I've had several apps where doing that is neccessary for it to work.

Running as administrator didn't help in 32 bit windows 7 professional.

I have the following NET's installed by default in case this is a Microsoft VB supportive files issue:
Microsoft® .NET Framework Version 2.0.50727.4927
Microsoft® .NET Framework Version 3.0.6920.4902

Norm

[Archangel]

Hi Norm,
I had problems installing on win98 required a file not in win98, got it off the net.

Have you tried to run in compatibility mode ?

[Normnet]

Tried compatibility mode, no luck.
Tried installing missing files found in XP but no luck.

Norm

[HenrikOlsson]

Hi Norm,
I'm running 1.3.0.1 and, like I said, I don't have any problems with on Win7 64bit. It's been over a year since I installed this machine so I'm not sure if I HAD any problems getting it running but I don't think I did.

I know it's not much help but anyway....

/Henrik.

[Normnet]

Maybe I could try copy and paste of the missing MSSTDFMT.DLL
In XP it's located in X:\Windows\System32
Is the same true in Windows7?

Norm

[mackrackit]

Win7 64 bit using PicMultiCalc just fine.

When I searched my system for MSSTDFMT.DLL all I got was
tweak_xp.xml
it has this line

%SYSTEM%\CPUINFO2.DLL %SYSTEM%\hxphk.ocx %SYSTEM%\MSGHOO32.OCX %SYSTEM%\MSINET.OCX %SYSTEM%\msstdfmt.dll %SYSTEM%\MSWINSCK.OCX

the file is located here on my machine.
C:\Program Files (x86)\Common Files\Seagate\BackupScripts
???

[HenrikOlsson]

Hi,
On my system that file is located in the WOW64 folder but mine is 64-bit as well. Unfortunately I don't know where it would default to on a 32-bit Win-7 installation. I feel your pain Norm and I'm sorry I can't be of more help.

/Henrik.

[Demon]

I had to download & install Microsoft ActiveX control Pad to get LCD tool working.

I had to download & register MSSTDFMT.DLL to get Timer tool working.

All tools worked after that.

Nice utility, I had the old SPBRG version.

Hi, we are pleased to see that you are using our forum. We'd like you to become a member of our community. Membership is FREE, please REGISTER and view our forums without these annoying reminders! Once registered you may post on the forums, download from the file areas and use the WIKI without interruption. REGISTER NOW

[Demon]

If you get this in Win 7 64bit:

ActiveX Control Pad Setup:
the app was unable to start correctly (0xc0000142)

Run in XP compatibility mode.



To register MSSTDFMT.DLL in Win 7 64bit:

- download the file from microsoft.
- copy to C:\Windows\SysWOW64 folder
- RUN REGSVR32 C:\Windows\SysWOW64\MSSTDFMT.DLL

Robert

[Ioannis]

It is surprising, but on my new and fresh Win7-64Bit system, with no VB studio installation if that matters, I did nothing special. Just executed the Steves nice job. It runs with no error messages!

Lucky me

Ioannis

[Demon]

I don't have VB6, MCSP, PBP or anything else programming-oriented on the Win 7 64-bit system yet either; just FS-X, PSP-XI, Open Office and Turbocad 11.

I bet you have software that already have those DLL included.

Robert

[Ioannis]

But cannot tell which...

Ioannis

[enauman]

When I try to run the calculator, I get a 'runtime error 7' out of memory

[mackrackit]

And the OS is?

[Demon]

Some reading for the error from google here:

http://ezinearticles.com/?How-to-Fix...ory&id=4867634

Robert

[mister_e]

I may still have the full installation package. Just PM me your e-mail.