MELABS USB Programmer not seen in Microcode Studio

[AndrewC]

I'm just trying to get rolling and falling at every hurdle it seems

Anyway, I bought the MELABS USB programmer. Installed it's software. Installed Microcode Studio. When trying to select the programmer in Microcode Studio I only get the options of EPIC or Serial. Any suggestions ?

Andrew

[JoeK]

Andrew,

I had the same problem with Microccode Studio Plus. I emailed MElabs and their response was..."Simply select the melabs Serial Programmer in MCS. The software is the same as the melabs USB Programmer."

It seems to work OK.

[AndrewC]

Andrew,

I had the same problem with Microccode Studio Plus. I emailed MElabs and their response was..."Simply select the melabs Serial Programmer in MCS. The software is the same as the melabs USB Programmer."

It seems to work OK.

Thanks for answering Joe. I got the same answer from MeLabs but I've been travelling so haven't had a chance to test it.

Andrew