quickBlue™ Link


+ Reply to Thread
Results 1 to 5 of 5
  1. #1
    Join Date
    Apr 2003
    Location
    Cambridge - UK
    Posts
    888

    Default quickBlue™ Link

    quickBlue™ Link Easily adds Bluetooth™ to your product without the need for Bluetooth™ design, you can see an example of quickBlue™ Link in a data logging application by downloading the quickBlue™ Link documentation and demo app from the quickBlue™ web site: http://www.quickblue.co.uk/quickblue-link.html

  2. #2
    Join Date
    Sep 2003
    Location
    Vermont
    Posts
    373

    Default

    Hi Lester,
    Since these units work at 2.4 Gig, why is the link speed fairly low? Are there any units that work in the 1Mbit range? I'd like to send some picture files, and 115K is even slow for this.

    Ron

  3. #3
    Join Date
    Apr 2003
    Location
    Cambridge - UK
    Posts
    888

    Default

    The maximum underlying link speed is actually up at around 700k, but our quickblue product is aimed at the majority of our client base and 115k is pretty much the maximum required by them.

    Of course we could supply the Bluetooth module without our quickblue firmware and you could write your own routines to drive it, its perfectly feasable. Thousgh you might have trouble getting more than 384k (nearest standard baud rate) out of a PIC.

  4. #4
    Join Date
    Sep 2003
    Location
    Vermont
    Posts
    373

    Default

    My wish is for a bluetooth link with SPI for truly high speed with our little PICs. I will tap my Ruby slippers and say it three times... OK, it's early yet, I'll be alright when the caffeine kicks in!

  5. #5
    Join Date
    Oct 2005
    Location
    New Jersey
    Posts
    425

    Default Bluetooth to PIC

    Hi,

    I would like to develop a simple device using Bluetooth. What I would like to do it use either my cell phone or my laptop to control a bluetooth chip.....maybe interface it with a PIC if needed. The device will only need to turn on say 4-6 outputs and if it could read the status of a few more that would be great.

    I know very little about Bluetooth, just enough to link my cell phone with my laptop. Is there a cheap version of a Bluetooth module that I can use? Is it difficult to interface? Is there an off the shelf device (I noticed Quick Blue but wasn't sure) that I don't need to modify the code too much to accomplish what I need.

    Thanks,

    Chris

Similar Threads

  1. pic to pic ir link versus wired link : help please anyone
    By xnihilo in forum mel PIC BASIC Pro
    Replies: 13
    Last Post: - 30th May 2008, 21:01
  2. Newbie radio link issue
    By George in forum mel PIC BASIC Pro
    Replies: 31
    Last Post: - 28th February 2007, 04:28
  3. HSERIN/OUT or Serin/Out for AIR Link
    By mankan in forum General
    Replies: 4
    Last Post: - 25th May 2006, 15:19
  4. need help to set up a serial link
    By kinsiro in forum Serial
    Replies: 8
    Last Post: - 7th March 2006, 16:47
  5. help with error checking GPS data over audio link
    By MUC in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 21st February 2005, 20:23

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts