+ Reply to Thread
Results 1 to 3 of 3

Thread: PBP+MCS+PICKit1

  1. #1
    sincity337's Avatar
    sincity337 Guest

    Question PBP+MCS+PICKit1


    First let me say I hope this is the correct forum for this question.

    I am trying to use a PICKit1 to program a 12F675 via MCS and the application that came with the PICKit. In order to use this programmer I need to add a new device. I have tried to use it, but my compiled hex file doesn't get passed to the PICKit programming application. I have since found that MCS allows me to send parameters to the programmer (in this case the PICKit) that allow me to 'bind' hex filenames and target devices. For the life of me I cannot find the correct syntax that might work for me.
    Has anyone out there any experience with this issue? Any information that can be provided would be greatly appreciated.

    Thanks in advance....


  2. #2
    Thomas Williams's Avatar
    Thomas Williams Guest

    Default PICKIT 1 and PBP

    You need to upgrade the firmware from Microchip to write from PBP. Otherwise you get a write error everytime. I purchased the upgrade firm ware and new chip for 5$.


  3. #3
    sincity337's Avatar
    sincity337 Guest

    Smile Thanks!


    I will search the Microchip website and give that a try. Thanks so much for the information, I really appreciate the help! I'll let you know if it worked for me.


Similar Threads

  1. PBP Book
    By Bruce in forum Off Topic
    Replies: 81
    Last Post: - 9th June 2010, 10:37
  2. PBP upgrade queries
    By muddy0409 in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 7th November 2006, 12:45
  3. Compiler differences between PBP 2.33 & 2.46
    By nikopolis in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 2nd May 2006, 19:01
  4. Newby- PBP wont compile for 18F (MPLAB)
    By jd76duke in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 17th December 2005, 23:30
  5. PBP / XP Crash
    By pondindustrial in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 27th November 2005, 03:16

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts