Pid

Closed Thread
Results 1 to 2 of 2

Thread: Pid

  1. - 2nd November 2005, 09:34 #1
    colarsson's Avatar
    colarsson
    colarsson is offline Junior Member
    Join Date
    Aug 2005
    Location
    Sweden
    Posts
    2

    Default Pid

    Hi

    Is it possible to implement a PID algorithm in pbp.

    I want to regulate a temperature by a 0-5V output to a pwm-module.

    Thank you

    C. Larsson / Sweden
  2. - 2nd November 2005, 10:18 #2
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,614

    Did you find this post helpful? Yes | No

    Wink PID ready to use

    Hi, Colarsson

    there's a program to use on the Parallax site : http://www.parallax.com/dl/docs/books/edu/ic.pdf

    look at page 147 ... few mods ,and it will fit to your application.

    Alain
    Last edited by Acetronics2; - 2nd November 2005 at 10:24.
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
« Previous Thread | Next Thread »

Similar Threads

  1. 4 Channel Thermostat using PID loops
    By malc-c in forum Code Examples
    Replies: 36
    Last Post: - 18th March 2013, 10:17
  2. PID controller in 16F737
    By joeri in forum mel PIC BASIC
    Replies: 8
    Last Post: - 24th June 2006, 11:39
  3. PID CONTROLLER help..
    By tkly36 in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 12th April 2006, 07:19
  4. PID controller and serin/serin2...help
    By tkly36 in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 8th April 2006, 10:19
  5. PID Loop
    By nemo in forum General
    Replies: 4
    Last Post: - 1st July 2005, 18:02

Members who have read this thread : 1

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules