Programming problem


Closed Thread
Results 1 to 6 of 6
  1. #1
    Join Date
    Apr 2022
    Posts
    2

    Default Programming problem

    Hi. I'm having trouble programming 18F45K22 micros with the U2 programmer. The HEX file has been used multiple times before but now I get the following error message:

    "Configuration verify error at 0000.
    0200 should be 3200
    Continue verifying?"

    Any ideas
    Mo

  2. #2
    Join Date
    Nov 2003
    Location
    Greece
    Posts
    3,795


    Did you find this post helpful? Yes | No

    Default Re: Programming problem

    I do not know about the U2 programmer but in similar cases I had to erase first before programming.

    Ioannis

  3. #3
    Join Date
    Apr 2022
    Posts
    2


    Did you find this post helpful? Yes | No

    Default Re: Programming problem

    Hi. Thanks for the tip.
    I tried it but still no success but what I found was if I erase the chip, then read it back, reload my hex file, then it seems to programme ok.
    Weird. I've been using the Melabs U2 programmer for years and never had to go through that process.

    Mo

  4. #4
    Join Date
    Apr 2014
    Location
    OK
    Posts
    557


    Did you find this post helpful? Yes | No

    Default Re: Programming problem

    Did you get the latest PBP3.1.5 update? If so, you need to update the U2 software as well. If you did update both, maybe there's a new bug in one of the two.

  5. #5


    Did you find this post helpful? Yes | No

    Default Re: Programming problem

    I get that same error with my U2 with PIC16F819. The message will either be "Target device does not match specified device", "Configuration verify error at 0000" or "Configuration verify error at 0000 or 0200 should be 3200 Continue verifying?" Except I get different numbers for 0200 and 3200.

  6. #6
    Join Date
    Nov 2003
    Location
    Greece
    Posts
    3,795


    Did you find this post helpful? Yes | No

    Default Re: Programming problem

    Did you erased it first?

    Ioannis

Similar Threads

  1. Help - programming problem!
    By George in forum mel PIC BASIC Pro
    Replies: 9
    Last Post: - 2nd September 2010, 13:52
  2. Re-Programming Problem
    By Kamikaze47 in forum mel PIC BASIC Pro
    Replies: 10
    Last Post: - 5th April 2009, 02:25
  3. PIC18F4620 Programming problem
    By JavPar in forum mel PIC BASIC Pro
    Replies: 15
    Last Post: - 6th December 2008, 05:21
  4. 18F1220 programming problem
    By jderson in forum mel PIC BASIC Pro
    Replies: 8
    Last Post: - 26th June 2008, 15:03
  5. Problem programming the PIC16F648A
    By Edgardo_2 in forum General
    Replies: 2
    Last Post: - 29th December 2006, 01:02

Members who have read this thread : 1

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts