DT_INTS-18 for 27K40
+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    Join Date
    May 2019
    Posts
    2

    Default DT_INTS-18 for 27K40

    Hi guys
    I am planning to use PIC18F27K40, it is absolutely necessary to use DT_INTS-18
    for the project. I will also use low priority interrupts. I have seen several
    modifications of DT_INTS-18 to cope with these chips but I am uncertain of
    which one to use. The versions I have run in to are DT_INTS-18-K40, DT_INTS-18_3_4b
    and DT_INTS-18_3_4c. How well are they tested? As I understood there were some
    issues with low priority interrupts. In one thread I read about DT_INTS-18_3_4c
    but the link to the software was not working. If this is the one, does anyone
    have this code?

    Best regards

    Lasse

  2. #2
    Join Date
    Mar 2003
    Location
    Commerce Michigan USA
    Posts
    1,177

    Default Re: DT_INTS-18 for 27K40

    Here is the .zip file for DT_INTS-18_3_4c. I have used this for 18F27K40 and 18F47K40 with out any problems.
    Attached Files Attached Files
    Dave Purola,
    N8NTA
    EN82fn

  3. #3
    Join Date
    May 2019
    Posts
    2

    Default Re: DT_INTS-18 for 27K40

    Perfect

    Thank you Dave

Similar Threads

  1. IOC on the 27k40
    By longpole001 in forum PBP3
    Replies: 3
    Last Post: - 31st July 2018, 11:28
  2. DT_INTS and 18F26k22
    By Mike2545 in forum mel PIC BASIC Pro
    Replies: 14
    Last Post: - 9th September 2017, 16:08
  3. Dt_ints-14
    By iw2fvo in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 18th November 2013, 07:57
  4. Re: DT_Ints-18
    By Steve_88 in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 4th March 2012, 18:39
  5. DT_INTs with 16F690
    By Dick Ivers in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 29th January 2010, 22:20

Members who have read this thread : 19

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts