e32 rx/tx module usage


+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2008
    Location
    Varese , Italy
    Posts
    308

    Default e32 rx/tx module usage

    Gooday to all of you in this forum,

    I am using a PIC18 micro and I have to control the E32 rx/tx module in order to send and receive data.
    I did read that the module operate through the UART ( rx_tx lines) plus a couples of other pins that could be optional (?).
    Is there any sample picbasic code to take as example for controlling the e32 please ?
    Thanks in advance for any assistance on the matter.
    Regards,
    Bye

  2. #2
    Join Date
    Jul 2006
    Location
    Lazio, Italy
    Posts
    41

    Default Re: e32 rx/tx module usage

    hi, in these days I am working on a temperature sensing project with data transmission through an E32915T30D and a receiver of the same type. I am using an 18f252 and a DS18B20 as a sensor. As soon as it's finished, I'll be happy to share my experience with you.

  3. #3
    Join Date
    Jun 2008
    Location
    Varese , Italy
    Posts
    308

    Default Re: e32 rx/tx module usage

    Thanks for your message: I hope to see some reference code.
    Bye

Similar Threads

  1. 3642bh display module pinouts on tm1637 module
    By longpole001 in forum Schematics
    Replies: 0
    Last Post: - 31st July 2018, 18:09
  2. Temperature Indicator Usage
    By gunayburak in forum mel PIC BASIC Pro
    Replies: 13
    Last Post: - 5th August 2015, 16:53
  3. Interrupt usage
    By Russ Kincaid in forum mel PIC BASIC Pro
    Replies: 9
    Last Post: - 20th April 2008, 16:20
  4. Serin usage?
    By champion in forum mel PIC BASIC Pro
    Replies: 14
    Last Post: - 24th January 2007, 01:57
  5. Timer1 usage in PIC18F252
    By EShatara in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 4th December 2005, 01:39

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts