Annoying pop up after compile


Closed Thread
Results 1 to 7 of 7
  1. #1
    Join Date
    Jun 2011
    Location
    Indian Harbour Nova Scotia
    Posts
    108

    Default Annoying pop up after compile

    Using Micro code editor, whenever I hit Compile, I get an annoying copyright notice which requires me to acknowledge before it disappears. Any way I can get rid of it to save me that extra click?

    The popup is actually for MELabs programmer, beta software.

  2. #2
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959


    Did you find this post helpful? Yes | No

    Default Re: Annoying pop up after compile

    The "Splash Screen" only pops up in the Free beta version.

    If you purchase the Upgrade, that screen will go away.
    http://store.melabs.com/cat/upgrades.html
    DT

  3. #3
    Join Date
    Jun 2011
    Location
    Indian Harbour Nova Scotia
    Posts
    108


    Did you find this post helpful? Yes | No

    Default Re: Annoying pop up after compile

    I bought PBP...you mean I have to buy something else that runs WITHIN the program? Should I have stuck with the previous version (non-beta)?

  4. #4
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959


    Did you find this post helpful? Yes | No

    Default Re: Annoying pop up after compile

    You don't have to buy anything if you already have a Full version of meprog.

    meProg is the Gui for the programmer hardware such as the U2-USB or EPIC programmers.
    It's not part of PicBasic Pro.

    If you use the version that came with your programmer, you won't have to deal with the Splash screen.
    You'll just need to point MicroCode Studio to that version.
    View > Compile and Program Options > Programmer tab > Edit button

    Or:

    In MicroCode Studio, there are four compile buttons.
    1. Compile Only - F9
    2. Compile and Program - F10
    3. ICD compile
    4. ICD Compile and Program
    If you use Compile Only (F9), it will not try to open meProg everytime you compile.
    When you are ready to program, press F11 then OK the splash screen once.
    DT

  5. #5
    Join Date
    Jun 2011
    Location
    Indian Harbour Nova Scotia
    Posts
    108


    Did you find this post helpful? Yes | No

    Default Re: Annoying pop up after compile

    Thanks Darrel. I'll revert to the non-beta version. I really didn't see the difference between beta and the previous version anyway.

    Usually when I compile, it's compile and program, for what I'm doing now...just tweeking the output of my program.

  6. #6
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959


    Did you find this post helpful? Yes | No

    Default Re: Annoying pop up after compile

    The beta version is for testing of new parts, which get added frequently.
    If you aren't using any new parts, stick with the released version.

    When you do need the new parts, it's only $10 for the upgrade.
    DT

  7. #7
    Join Date
    Jun 2013
    Posts
    12


    Did you find this post helpful? Yes | No

    Default Re: Annoying pop up after compile

    When I hit "Compile Program" it compiles and opens up the programmer. Then I have to hit Program, in the programmer software. It used to program automatically, ie by itself. What am I doing wrong?

Members who have read this thread : 2

You do not have permission to view the list of names.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts