+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Join Date
    May 2011
    Posts
    42

    Default Finding digital signals

    Is there a really easy to use method to see if there is some type of digital communications being passed through a wire? I am looking for something I can hand to another person with 2 minutes of instruction that will give them about a 90% chance they will identify a wire that has SPI, I2C, UART, maybe USB or UART data going on. There is no need to figure out anything other than "there is something going on in this wire." An Oscope is normally the method but that is too complicated for my application. I am wondering if a tone probe might work. Any ideas? Thanks.

  2. #2
    Join Date
    Nov 2005
    Location
    Bombay, India
    Posts
    862

    Default Re: Finding digital signals

    The easiest way to identify signal activity on a line is the digital logic probe that sounds a beeper when it identifies a logic low. So, some train of beeps present on probing the line will indicate signalling activity.

Similar Threads

  1. range finding HELP
    By longpole001 in forum General
    Replies: 7
    Last Post: - 3rd August 2014, 15:42
  2. finding missing pulses
    By longpole001 in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 16th May 2013, 11:23
  3. need help finding a PIC
    By asdhillon86 in forum General
    Replies: 1
    Last Post: - 9th January 2011, 23:49
  4. Finding variables in RAM
    By Charles Linquis in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 6th October 2010, 02:48
  5. Lost in finding a example
    By F1CHF in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 18th January 2007, 22:20

Members who have read this thread : 13

You do not have permission to view the list of names.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts