Hello, welcome to our forum.

It looks like you have registered but you have not yet posted and messages. Our requirements are that you must post at least two messages, to allow the moderators to review your registration, before you will be allowed access to the full range of forum areas.

Please make a couple of posts, until then you may see a notice that says you are banned from certain forum areas.


Thank you.

Remove Text Formatting
Loading...

+ Reply to Thread
Results 1 to 5 of 5
  1. #1
    Join Date
    Jun 2016
    Posts
    45

    Default How to update meCONFIG

    I did purchase some pic 18F1330 for a new project I have in mind. Unfortunatly I discover that this device is not present into my meCONFIG program. I did check at Melab site but could not find any reference to this program. Anybody knows how to update this utility?

    Thank you.

    Alberto

  2. #2
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,918

    Default Re: How to update meCONFIG

    That chip is supported with the Gold edition.
    http://pbp3.com/devicelist.html
    Dave
    Always wear safety glasses while programming.

  3. #3
    Join Date
    Oct 2005
    Location
    Sweden
    Posts
    3,053

    Default Re: How to update meCONFIG

    meConfig was written by Darrel Taylor who's unfortunately no longer with us.
    I believe Charles of MeLabs said that meConfig is what is and will not be maintained or updated. But please correct me I've got that wrong.

    /Henrik.

  4. #4
    Join Date
    Jun 2016
    Posts
    45

    Default Re: How to update meCONFIG

    Yes I have pbp3 golden edition and the cip is listed and found. The program meCONFIG is an important tool (at least for me) and it is a pity not maintaining it! I have read several thread where Mr Darrel has posted, and if meCONFIG is a program he wrote I feel honoured to use it! And Melab should keep it updated just in memory of a great man.

    Alberto

  5. #5
    Join Date
    Jan 2005
    Location
    Montreal, Quebec, Canada
    Posts
    2,193

    Default Re: How to update meCONFIG

    It's too bad that utility is not maintained by melabs, but then they'd open a can of worms with all the other DT utilities.

    Robert
    Not as dumb as yesterday, but stupider than tomorrow!

Similar Threads

  1. Just to update my registry ...
    By Pimentel in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 24th January 2017, 18:08
  2. PBP update ??
    By lerameur in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 18th January 2011, 14:56

Members who have read this thread : 18

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts