Thank you Lester!
I don't know why I missed responding to the registration email or if it ended up somewhere it shouldn't at my end.

Anyway, I just did what Norm described and it seems to have worked perfectly. I now have a working AMICUS18 setup that can be bootloaded directly from within MicrocodeStudio. I have no shortage of development boards (mostly MikroE stuff) and they're all great but none are as fast and "transparent" to use as the AMICUS18 setup. Small programs compiles and downloads in a second while with the other "systems" I have to jump between application, reload .hex file, click buttons, (since MikroE's bootloaders doesn't provide a command line interface), press buttons on the board (to get into bootload mode) or use the PICKit3 which, for small programs, is MUCH slower than bootloading.

So, thank you Lester for posting the information and special .exe (and for the AMICUS platform) and thank you Norm for providing such detailed instructions on how to get it going on W10! Much appreciated!

/Henrik.