PICKIT 2 verification failed at memory address 0x0000


Closed Thread
Results 1 to 3 of 3
  1. #1
    Join Date
    Jan 2016
    Posts
    1

    Default PICKIT 2 verification failed at memory address 0x0000

    I have been using a "pic16f628A"

    The problem I am getting:

    Failed to verify at programming address 0x0000 (when I click the Verify button).

    Failed to program at programming address 0x0000 (when I click the Write button).

    Successful (when I click Read button).

    Successful (when I click erase button).

    when I put another chip with same model is working

  2. #2
    Join Date
    Dec 2010
    Posts
    409


    Did you find this post helpful? Yes | No

    Default Re: PICKIT 2 verification failed at memory address 0x0000

    Maybe a silly question but are you SURE it's connected properly? Pins not offset by one, connector not backwards, no broken wires?

  3. #3
    Join Date
    Oct 2021
    Posts
    1


    Did you find this post helpful? Yes | No

    Default Re: PICKIT 2 verification failed at memory address 0x0000

    I had the same problem. Measure the correct value of the programming voltage.

Similar Threads

  1. First try at DT_INT's, I failed! help please!
    By MOUNTAIN747 in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 8th January 2012, 23:07
  2. Debug Failed
    By firdano in forum General
    Replies: 0
    Last Post: - 10th February 2011, 16:08
  3. Replies: 12
    Last Post: - 4th March 2010, 22:20
  4. DTMF verification
    By lerameur in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 2nd May 2008, 00:28
  5. Timing verification.
    By Dwayne in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 31st August 2004, 16:44

Members who have read this thread : 2

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts