18F1320 and I2C


+ Reply to Thread
Results 1 to 2 of 2

Thread: 18F1320 and I2C

  1. #1
    Join Date
    Mar 2011
    Location
    Los Angeles, California
    Posts
    322

    Question 18F1320 and I2C

    Hi All!
    I would like to use I2C with an 18F1320. It would be great to use pin 9 (RB1/AN5/TX/CK/INT1 and pin 10 (RB4/AN6/RX/DT/KBIO. In the past it seemed with some PICs could not use these pins. Can I use these pins with this PIC and how?

    Thanks, Ed

  2. #2
    Join Date
    Oct 2005
    Location
    Sweden
    Posts
    3,361

    Default Re: 18F1320 and I2C

    Hi Ed,
    Sure, if you're talking about using PBPs I2C commands then I don't see any reasons for not being able to use those pins.

    /Henrik.

Similar Threads

  1. 18F1320 question
    By Charlie in forum mel PIC BASIC Pro
    Replies: 8
    Last Post: - 11th March 2014, 10:57
  2. Another 18F1320 ICD confusion
    By Ramius in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 15th April 2012, 19:04
  3. 18f1320 icd
    By Ramius in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 13th April 2012, 14:00
  4. 18F1320 And I/0
    By johnyman34 in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 10th December 2006, 20:19
  5. How to define it, in 18F1320?
    By johnyman34 in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 4th November 2006, 19:01

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts