BASIC is NOT dead!!


Closed Thread
Results 1 to 9 of 9

Hybrid View

  1. #1
    Join Date
    Oct 2009
    Location
    Utah, USA
    Posts
    427

    Default BASIC is NOT dead!!

    OK BASIC aficionados! Listen up here...
    This is, to me, a game changer!

    If you are interested in the little ESP8266 modules you just HAVE to check out www.esp8266basic.com

    over on his (mmiscool) website there is very active development in implementing a form of BASIC that runs on several models of the ESP8266 including the -01 and -12 and the "nodemcu" model. (I have so far only tried the -01)

    You need only view the demo video and download the flasher.
    this will install the BASIC OS on your module
    all code development (IDE) runs in a webpage served up by the module itself!!!
    they are adding BASIC command statements daily making it better and better
    development is mostly by "mmiscool", but he does have a little help AND LOOKING FOR MORE HELP

    please note since development is VERY active some of the documentation is lacking
    you must click over to the forum and read most everything there... especially "NEWS" where most of the new commands are announced.

    below is my setup... and a very AMAZINGLY simple program that is very powerful. (Not written by me, just the provided example code with pin numbers changed to match the -01 module)
    It is a full blown thermostat! using an ds18b20 and an LED (with integral current limiting resistor) to represent ON/OFF of the thermostat.

    If you really like BASIC (or, like me, can only really only write code in BASIC) then you really owe it to your self to give it a go. Well and also want to bring in WiFi to your projects.

    Since the IDE is completely implemented within the module itself and accessed from a webpage then what could be more simple?
    In the image below showing my ESP8266-01 module take note of the pull-up 5K resistor soldered between the data and +V pin (and as noted earlier the LED has a built in current limit resistor)

    I highly recommend the USB ftdi module in the picture as it has built in 3.3v regulation and is extremely easy to use.
    you can get one here http://www.ebay.com/itm/CP2102-USB-T...QAAOSwBahVAS39

    also if you are going to buy an esp8266-01 module I have read that the ones on blue pcb have 512K mem and the ones on black pcb have 1 meg so you probably want the black ones (banggood.com has them) (but YMMV)

    again this is a work in progress and the only way to get through is to read over on the forum as well as try some of the examples both on his home page and over on the forum.

    I do not personally know "mmiscool" but he is really hitting the mark with BASIC, at least from my perspective.

    Name:  esp8266-01.jpg
Views: 18187
Size:  100.3 KB
    Name:  ftdi.jpg
Views: 16908
Size:  131.1 KB

    Sorry for the bad handwriting...
    Name:  pinout.jpg
Views: 16628
Size:  109.5 KB

    In this picture the module is mounted on the USB ftdi interface and communicating both serially to putty terminal and via wifi to my pc's web browser!
    Name:  espusb.jpg
Views: 16582
Size:  88.3 KB

    this photo shows the putty serial terminal window and the output from the module as well as the webpage from the module itself showing the values and temperature setpoint.
    Name:  putty.jpg
Views: 16665
Size:  57.7 KB
    Name:  code.jpg
Views: 16840
Size:  106.3 KB

    Please excuse all the effusive verb-ology (is that a word??) but I really can't contain myself!!
    Last edited by Heckler; - 25th November 2015 at 06:02.
    Dwight
    These PIC's are like intricate puzzles just waiting for one to discover their secrets and MASTER their capabilities.

  2. #2
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Default Re: BASIC is NOT dead!!

    Very nice!!!

    I will promote this to an article on the WIKI.
    Dave
    Always wear safety glasses while programming.

  3. #3

    Default Re: BASIC is NOT dead!!

    That looks handy! Thanks for posting..

    Under the basic is not dead, here's another tool for those who want to use pic32 and pic24. It uses a VB style coding

    http://www.firewing.info/

  4. #4
    Join Date
    May 2013
    Location
    australia
    Posts
    2,383

    Default Re: BASIC is NOT dead!!

    this does look promising , I had been getting flaky results and nearly given up in disgust --- turns out the power supply for the esp8266 is far more critical than I thought . 3.3v seems to work much better than 3.0 (was having the flash the memory not always updating and sometimes becoming corrupt after saving files).
    the 3v regulator on all of my usb-tty adapters has proved to be inadequate for the task of running esp8266 modules

  5. #5
    Join Date
    Oct 2009
    Location
    Utah, USA
    Posts
    427

    Default Re: BASIC is NOT dead!!

    I appears the source for the USB adapter board that I posted is no longer available or out of stock.

    Here is a link to one on Tindie.com
    https://www.tindie.com/products/Apri...pport-esp8266/

    That I believe is the same thing but updated to use a micro usb instead of the standard usb.

    and I found the original here...
    http://aprbrother.en.alibaba.com/pro...s_ESP8266.html

    I've never ordered anything from alibaba.
    Dwight
    These PIC's are like intricate puzzles just waiting for one to discover their secrets and MASTER their capabilities.

  6. #6
    Join Date
    Dec 2005
    Posts
    1,073

    Default Re: BASIC is NOT dead!!

    I haven't explored ESPBasic in depth but do know of a more powerful Basic for use with the ESP8266 and with Atmel chips including those used by Arduinos.
    http://www.zbasic.net/

Similar Threads

  1. Is BASIC dead ?
    By dsicon in forum General
    Replies: 28
    Last Post: - 26th January 2015, 06:04
  2. How do I know if a PIC is dead ?
    By rngd in forum General
    Replies: 8
    Last Post: - 15th April 2008, 10:03
  3. Is My Programmer Dead
    By mikendee in forum Off Topic
    Replies: 4
    Last Post: - 19th March 2008, 17:59
  4. Dead PICs
    By CocaColaKid in forum mel PIC BASIC Pro
    Replies: 16
    Last Post: - 15th August 2007, 14:12
  5. Dead display?
    By rossfree in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 12th July 2005, 19:27

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts