Replacing dtdp relay with mosfets


Closed Thread
Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2012
    Location
    PERTH AUSTRALIA
    Posts
    838

    Default Replacing dtdp relay with mosfets

    Hi Guys

    i would like to replace a DTDP relay with some descrete mosfets N and P pairs

    , but am having some issues with the cct i have made so far


    Description

    CCT A : works

    Q20 , Q18 pairs ensure polarity of the battery is correct as the battery charger modules dont have polarity protection

    Q19 isolates the bat charger MOD1 from the 7.2v when USB PWR is not on
    RLY1:B N/C connects the bat:B to bat:A when no USB PWR
    RLY1:B N/O connects bat:A to gnd so that MOD1 charger can charge it
    RLY1:C N/C uses the battery power when no USB Pwr
    RLY1:C N/O - connect USB to pwr cct , and charges battery

    Relay activated by USB pwr at 5v

    Note: USB power can be connected prior to batteries been installed in cct , as such incorrect battery polarity must be isolated , until corrected
    ---------------------------

    CCt B: does not work
    q100 = q20 IN CCT A
    q103 = q18 IN CCTA
    q101A works same as Q19 as described in cct A

    q102A: NCH replaces RLy1:B N/O in CCTA
    Q102B: Pch replaces Rly1:B N/C in CCtA
    Q101:B Pch replaces Rly1:C by isolating the 7.2v when USB PWr is on


    Problem:
    when q102A has USB_pwr = H , q102B remains on
    when q101:B remains on when USB_pwr is on

    suggestions ?
    power ccta.pdfpower cct b.pdf

  2. #2
    Join Date
    Jan 2005
    Location
    Montreal, Quebec, Canada
    Posts
    2,585


    Did you find this post helpful? Yes | No

    Default Re: Replacing dtdp relay with mosfets

    I keep thinking about the "chicken or the egg".

    I'm trying to wrap my head around circuit B but can't find the exact problem.

    Robert

  3. #3
    Join Date
    Feb 2012
    Location
    PERTH AUSTRALIA
    Posts
    838


    Did you find this post helpful? Yes | No

    Default Re: Replacing dtdp relay with mosfets

    i think it has to do with the voltages on q102b , gate vers drain voltage

    gate has 5v when usb_pwr is on , Drain has 3.7v , so differance is - 1.3v and is still on as a result ???

Similar Threads

  1. Replies: 6
    Last Post: - 8th August 2013, 11:36
  2. MOSFETS and Solenoids
    By Tobias in forum Off Topic
    Replies: 25
    Last Post: - 30th September 2009, 08:49
  3. Mosfets versus Transistors
    By Security in forum Off Topic
    Replies: 9
    Last Post: - 22nd September 2008, 17:35
  4. How to find complimentary mosfets???
    By manumenzella in forum Schematics
    Replies: 1
    Last Post: - 27th June 2007, 05:27
  5. replacing chips
    By Srigopal007 in forum mel PIC BASIC Pro
    Replies: 8
    Last Post: - 25th February 2005, 19:01

Members who have read this thread : 1

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts