Rfid mfrc522

[frankko]

Hello everyone, there is' someone who has used the RFID reader with mfrc522 13.56 MHz in "spi" type electrodragon? I can not find an example in picbasic. There 's no one who can' help me with a simple example? Thanks!

[jrprogrammer]

Why don't you check out the Raspberry Pi forum or Google RFID with a Raspberry Pi. I have a Raspberry Pi working on SPI with several of the cheap readers. Note that all these readers are not created equal: some are poor clones (in respect to the antenna tuning) and the working range is 1/2 of others. The python files will show you the setup procedures.

[frankko]

Thanks for the reply. I would have liked to use a pic 16f688 or 18F452 series that already 'possess and maybe use as the basic language. the reader is 'model MF522-ED-AN module uses Philips MFRC522 original chip, purchased on electrodragon, link http://www.electrodragon.com/product...ector-ic-card/ .

[metemoine]

There are cheap RFID modules that can read and write Mifare's tags and being sold at several web stores, like eBay and included with many "starter kits" nowadays. Simply search RFID-RC522 (MF-RC522).

[frankko]

hello metemoine,
thanks for the answer, as already' mentioned I would want a simple code in picbasic for the reading the kit's rfid mentioned here' above that it works with "spi."

[Demon]

Does anything here help?

http://melabs.com/samples/PBP-mixed/spimast.htm

I've never used SPI.

[frankko]

thanks for the indication Demon, I try to take a look.

[flotulopex]

Anyone did this?