Hello, welcome to our forum.

It looks like you have registered but you have not yet posted and messages. Our requirements are that you must post at least two messages, to allow the moderators to review your registration, before you will be allowed access to the full range of forum areas.

Please make a couple of posts, until then you may see a notice that says you are banned from certain forum areas.


Thank you.

Remove Text Formatting
Loading...

+ Reply to Thread
Results 1 to 6 of 6
  1. #1
    Join Date
    Apr 2012
    Posts
    4

    Question Help ! Controlling 3-Phase AC Induction Motors Using the PIC18F4431

    I start learn 3 Phase AC Induction Motors Using the PIC18F4431. Pz help me pointing the wa. how to create a phase difference of 120 degrees and calculate the value of sine table, timer interrupts and frequency. I do not need to change in frequency.thank all .

  2. #2
    Join Date
    Feb 2006
    Location
    Gilroy, CA
    Posts
    1,530

    Default Re: Help ! Controlling 3-Phase AC Induction Motors Using the PIC18F4431

    Here's some 3 phase for the PIC18F2431 chip. http://www.picbasic.co.uk/forum/cont...-DT-interrupts
    http://www.scalerobotics.com

  3. #3
    Join Date
    Apr 2012
    Posts
    4

    Default Re: Help ! Controlling 3-Phase AC Induction Motors Using the PIC18F4431

    Thankiu very much ! i will read it .
    I intend follow this guide but does not change frequency and PWM Fault detection plz more help.
    http://ww1.microchip.com/downloads/e...tes/00900a.pdf
    Quote Originally Posted by ScaleRobotics View Post
    Here's some 3 phase for the PIC18F2431 chip. http://www.picbasic.co.uk/forum/cont...-DT-interrupts

  4. #4
    Join Date
    Feb 2006
    Location
    Gilroy, CA
    Posts
    1,530

    Default Re: Help ! Controlling 3-Phase AC Induction Motors Using the PIC18F4431

    For that, I would use their source code! http://www.microchip.com/stellent/id...pnote=en020394

    The first link I shared only covers the
    how to create a phase difference of 120 degrees and calculate the value of sine table, timer interrupts and frequency.
    part.
    Attached Files Attached Files
    http://www.scalerobotics.com

  5. #5
    Join Date
    Apr 2012
    Posts
    4

    Default Re: Help ! Controlling 3-Phase AC Induction Motors Using the PIC18F4431

    Once more , thank ScaleRobotics !

  6. #6
    Join Date
    Apr 2012
    Posts
    4

    Default Re: Help ! Controlling 3-Phase AC Induction Motors Using the PIC18F4431

    And for 3 phase Power Control PWM, using a bit of Bruce's 18F2431 example :

    PTPERL = 206 'for 21.6khz
    PTPERH = 1
    Let me just how to calculate
    And timerone = 60950 ;gives about 60 htz sine
    Let me just how to calculate 60950
    And if I declare : PTCON0 = 0x00 ’Postscale 1:1, Prescale 1:1, Free Running
    PTCON1 = 0x80 ’PWM time base is on, count up!
    PWMCON0 = 0x20 ’Enable PWM0-1, Complementary
    PWMCON1 = 0x40

    I give 6 pwm (pwm(0-5)) connected to 6 IRG4PH50UD (3 phase inverter bridge)is ok ? Thank a lot!
    Quote Originally Posted by ScaleRobotics View Post
    Here's some 3 phase for the PIC18F2431 chip. http://www.picbasic.co.uk/forum/cont...-DT-interrupts
    Last edited by gaikieuuc; - 17th April 2012 at 17:57.

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts