can anyone tell me what is the pulse width required for turnigy TG9e servo motor


Closed Thread
Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2012
    Posts
    13

    Default can anyone tell me what is the pulse width required for turnigy TG9e servo motor

    i have this servo motor but i do not know the exact pulse width which i must provide for proper working of this servo motor.
    i need it to move to particular angles based on my requirement.
    so can anyone help me

  2. #2
    Join Date
    Feb 2006
    Location
    Gilroy, CA
    Posts
    1,530


    Did you find this post helpful? Yes | No

    Default Re: can anyone tell me what is the pulse width required for turnigy TG9e servo motor

    Name:  servo.jpg
Views: 2380
Size:  27.2 KB

    All hobby servo's work roughly the same. The exact angle will differ slightly on each one. Above shows the basic signal vs degrees. Most servo's will accept a 50 hertz pulse (pulse every 20 ms) with duration of .9 ms to 2.1 ms, with a "neutral" at 1.5 ms.
    http://www.scalerobotics.com

Members who have read this thread : 1

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts