mackrackit's ConnectOne example code - Page 3


+ Reply to Thread
Page 3 of 3 FirstFirst 123
Results 81 to 92 of 92
  1. #81
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Default Re: mackrackit's ConnectOne example code

    The internal 8MHz oscillator is fine for this.
    I use a PicKit2 to load the hex file onto the 4550.
    Dave
    Always wear safety glasses while programming.

  2. #82
    Join Date
    Mar 2009
    Location
    Colorado
    Posts
    378

    Default Re: mackrackit's ConnectOne example code

    Quote Originally Posted by kenruizal View Post
    uhm..Sir what must be use in oscillator is it ok 4mhz or 8mhz?..what software do you use to load into pic18f4550 sir?...
    I use an 8mhz external crystal with capacitors as shown in the schematic I will post with this. Like mackrackit, I also use the Pickit2 to load programs into my 18F4550.
    Attached Images Attached Images  

  3. #83
    Join Date
    Nov 2011
    Posts
    26

    Default Re: mackrackit's ConnectOne example code

    Hello sir john.. i would to know if the minisocket need an external antenna?or is it ok without extrnal antenna?tnx..

  4. #84
    Join Date
    Nov 2011
    Posts
    26

    Default Re: mackrackit's ConnectOne example code

    hello john is it ok to use the the 16F873A?...uhm sir is it ok to disconnect the PICKIT2 when your are done load it to ur PIC?tnx

  5. #85
    Join Date
    Nov 2011
    Posts
    26

    Default Re: mackrackit's ConnectOne example code

    Sir do you have a schematic how u connect the max232 in iwifi connectone to interface in PC?

  6. #86
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Default Re: mackrackit's ConnectOne example code

    I can not find my schematic but...

    Using the Nano Socket IWifi.

    Header J8 iWifi pin 8 connect to pin 12 max232
    Header J8 iWifi pin 9 connect to pin 11 max 232

    Max232 pin 13 connect to PC DB9 pin 3
    Max232 pin 14 connect to PC DB9 pin 2

    And the grounds (zero rail) are all common.
    Dave
    Always wear safety glasses while programming.

  7. #87
    Join Date
    Nov 2011
    Posts
    26

    Default Re: mackrackit's ConnectOne example code

    Ok sir..tnx..Sir mackrackit in your program and design? are u using iconfig to send to ur website and email..?tnx sir

  8. #88
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Default Re: mackrackit's ConnectOne example code

    Quote Originally Posted by kenruizal View Post
    Ok sir..tnx..Sir mackrackit in your program and design? are u using iconfig to send to ur website and email..?tnx sir
    Not sure I understand the question. This thread has all kinds of code showing how do send email and do FTP.
    Dave
    Always wear safety glasses while programming.

  9. #89
    Join Date
    Nov 2011
    Posts
    26

    Default Re: mackrackit's ConnectOne example code

    Helo Sir...what software connectone u use to convert the HTML to image file?what is the name of software..tnx sir

  10. #90
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Default Re: mackrackit's ConnectOne example code

    The Config Utility has the program used to do the conversion.
    Dave
    Always wear safety glasses while programming.

  11. #91
    Join Date
    Jul 2011
    Posts
    35

    Default Re: mackrackit's ConnectOne example code

    Hi,
    I just ordered a Connect One SocketLAN, and am doing some background searching for tips on how to hook it up to a PIC project. It looks like the serial pins are the most basic but am a little in the dark about the above conversation. Should I be adding hardware/provisions for a MAX232 circuit to talk to a terminal program too, and if so, how should it connect... to the PIC, or to the SocketLAN? I see Macrackit's code examples, but it doesn't tell me anything about how the hardware is connected. This is my first attempt at an ethernet project, and don't want to miss anything critical as I'm mulling over a board layout. I plan to start off with the PIC's serial connection to the SocketLAN for simple emails etc.

    Anybody have a simple hookup drawing, or can explain what this terminal connection you're talking about is?

    Thanks

  12. #92
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Default Re: mackrackit's ConnectOne example code

    Start at the beginning of the thread.
    Dave
    Always wear safety glasses while programming.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts