MCS error


+ Reply to Thread
Results 1 to 4 of 4

Thread: MCS error

  1. #1
    Join Date
    Sep 2005
    Location
    Campbell, CA
    Posts
    1,107

    Default MCS error

    I have one computer that - when I compile with MCS, a HEX file is generated, and all works normally - but I get a

    "CANCELLED" message in the toolbar instead of SUCCESS.

    There is no clue as to what generated the message. Doe anyone know?
    Charles Linquist

  2. #2
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959

    Default

    Don't know if it's the same issue or not, but I get that every now and then.

    Rebooting my computer always fixes it.
    <br>
    DT

  3. #3
    Join Date
    Sep 2005
    Location
    Campbell, CA
    Posts
    1,107

    Default

    I'll try that.

    And by the way - I figured out how to use CHK?RP. At least I think I have.
    I find the location of the PBP variables, and then write to / read from that location in my ASM routine. Seems to work.
    Charles Linquist

  4. #4
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959

    Default

    Somehow I knew that question was for me.
    Tried twice to write something ... but it didn't sound right ...

    There's a little more to CHK?RP than meets the eye.
    I'll go back to your other thread.
    <br>
    DT

Similar Threads

  1. Loop with two motor and 2 sensors
    By MrRoboto in forum mel PIC BASIC
    Replies: 4
    Last Post: - 8th December 2008, 23:40
  2. Optimizing DIV
    By skimask in forum mel PIC BASIC Pro
    Replies: 41
    Last Post: - 22nd September 2008, 04:58
  3. pbp245 compliation error
    By Woodzy in forum mel PIC BASIC Pro
    Replies: 9
    Last Post: - 25th July 2006, 05:59
  4. 16F88 Compile error
    By Toley00 in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 2nd November 2005, 00:22
  5. Compiler/Assembler Error
    By LT_Pic in forum General
    Replies: 7
    Last Post: - 21st July 2005, 09:47

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts