no INC files for PIC18's in PBP244

[comwarrior]

Went to get the fuse options for 18F4550 and their are no M18XXXXX.inc files in the INC directory...

is this correct?

I'm after the fuse options... I've got the ones for MCLRE and LVP etc from winpic, but the multiple choice ones for OSC, PLL devider, OSC devicer, VBOR and BOR I can't guess...

Also, had a go at compiling some working code originally for the 16F877A and i get the following compiler error...

ERROR: Unable to find -p<pic> processor file 18f4550.BAS

is PBP244 not designed to work with ether 18F2455/2550/4455/4550?

[Acetronics2]

Hi, Com

PBP 2.44 is a bit old ...

you might think to update it !!!

Alain

[comwarrior]

indeed, I baught it about 2 years ago ish because i wanted to build an advanced nav UAV but then work took priority...

I believe 2.6 is the new version? is their an upgrade?

[Acetronics2]

Of Course !!!

I think I received mine end August ...

You'll really appreciate the V 2.50 BIG enhancements too ...

Alain

[comwarrior]

indeed, PBP upgrade is on my list, it's going to be middle of next month befor i can order it...

In the mean time, I think i have a solution...
I've hunted through all the other BAS, LIB, MAC files for other PIC's, some are PIC18's...
So, I've built my own by looking through and copying others and consulting the manual...

However, pm refuses to compile PIC18's so, i got PBPW to produce the ASM files and i have MPLAB to compile it...

So, i tried it on my Knight Rider test code (and board)... All is good! except the odd random reset which i think is ether BOR or the WDT...