please tel me how to make a gprs connection


Closed Thread
Results 1 to 5 of 5
  1. #1
    Join Date
    Sep 2009
    Posts
    2

    Default please tel me how to make a gprs connection

    please i need to know how to make a gprs connection with a telit gm 862/gps
    with pbp.
    many thanks.

  2. #2
    Join Date
    May 2008
    Location
    Italy
    Posts
    825

    Default

    Welcome to the forum.

    After having plugged in the antenna, SIM card, and serial cable. Power on the unit, open up a serial port communication program ( HyperTerminal or any other serial com program) and connect @ 115200 bps, 8 data bits, no parity, 1 stop bits, no flow control.

    Sending the proper AT commands should result in the message "OK" being received.

    The device supports standard AT commands therefore it should be possible to use some code already tested. Search the forum for that.

    Al.
    Last edited by aratti; - 7th September 2009 at 13:35.
    All progress began with an idea

  3. #3
    Join Date
    Nov 2003
    Location
    Greece
    Posts
    3,796

    Default

    You just want to connect to a network, or you want from one gprs modem to connect to another gprs modem?

    Like the old way of calling in dial-up connection from one modem to another?

    If you want the later, I am afraid you cannot do that as the Network Provider gives you dynamic IP and you have to put in the middle a Server to forward the data packets. This Server should have a static IP or at least something like DynDNS.

    If anyone has any other idea please reply. This is bothering me for a long time...

    Ioannis

  4. #4
    Join Date
    Sep 2009
    Posts
    2

    Default gprs

    Joannis,

    thanks for You reply,
    that who i need are the at commands for a gprs connection of a gm862 connectd with a pic 18f2620 and pic basicpro.

    thank You in advance
    gaepat

  5. #5
    Join Date
    Jun 2009
    Location
    Sc*nthorpe, UK
    Posts
    333

    Default

    Modem manufacturers usualy publish the AT comands here is a link for Telit

    http://http://www.telit.com/en/products.php?p_id=3&p_ac=show&p=4
    Steve
    Last edited by EarlyBird2; - 11th September 2009 at 22:17.

Similar Threads

  1. Change On Interrupt, PIC16F884
    By elec_mech in forum mel PIC BASIC Pro
    Replies: 17
    Last Post: - 14th November 2008, 18:25
  2. CO2 MG811 sensor connection
    By elektoro2009 in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 8th May 2008, 01:49
  3. Automatic VB6 to pic serial connection
    By arniepj in forum Code Examples
    Replies: 13
    Last Post: - 10th January 2008, 08:57
  4. How come they make electronics hard as poss
    By George in forum Off Topic
    Replies: 9
    Last Post: - 14th July 2007, 00:54
  5. RC - connection using RCTime produces strange results
    By selbstdual in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 8th February 2007, 17:16

Members who have read this thread : 1

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts