I need to know the AT command to access and browse the SIM menu.
There are some push pull services given by the mobile operator. So how i can access the menu by the help of AT command or any other way. I am using SIMCOM gsm module.
I need to know the AT command to access and browse the SIM menu.
There are some push pull services given by the mobile operator. So how i can access the menu by the help of AT command or any other way. I am using SIMCOM gsm module.
Sim toolkit command:
AT^SSTK=? (responce = ^SSTK:)
AT^SSTK= Length [,Mode] CR
where:
Length = toolkit command
Mode = 0 (single command)
Mode = 1 (sequence of commands)
CR = carriage return
The above comand works with Siemens, it should works also with your SIMCOM gsm module
Al.
Last edited by aratti; - 15th June 2009 at 16:12.
All progress began with an idea
hi aratti
This command do not work in simcom sim300c module.
Gives an error message.
Bookmarks