hey guys i am new to pic basic pro and or also to these forums I been loving it and i made a few simple led flashes on a 12f683 chip. I am a gamer to I play xbox 360. and There is this new thing called rapidfire it sends lots of ground pulses to the trigger which this enables it to fire lmuch faster than a humn at 15-33 times a second i have done this But What i needed help was on How to use the acuall triggers for rapidfire i was using a sperete switch for the rapidfire. My freind told me that each time you press a trigger once, it sends a analog pulse or somthing of that bature and when the pic Sees that analog pulse coming it sends the Rapidfire ground pulses actvating the rapidfire i needed help on that mabye some tutorials guys also...





_______________________________
my freind also said if any one knows asm to mbye show me ow to do this in pic basic.

Code:
clrf GPIO
clrf FLAGS    ;clear outputs and code status register
movlw 0x07
movwf CMCON0    ;comparators off
bsf  STATUS, RP0   ;bank 1
movlw 0x0F    ;start with 0-3 inputs (ADC read)
movwf TRISIO    ;pin 0 & 1 & 5 out, all other inputs
movlw 0x51    ;Fosc/16, pin 0 analog
movwf ANSEL    ;Right trigger is analog input
movlw 0x04
movwf WPU     ;enable week pullups
bcf  OPTION_REG, 7  ;enable all week pullups 
bcf  STATUS, RP0   ;bank 0

movlw 0x01    ;Left just, Vdd, channel 0
movwf ADCON0    ;module on.
movlw 0x10